Cisco Managed Layer 3 Network Switch Catalyst 3560X 48 Port
WS-C3560X-48PF-L
Product Information
Cisco Catalyst WS-C3560X-48PF-L is 48 Gigabit Ethernet ports
standalone switch with no stacking option in LAN base feature set.
Four optional network modules and license-base software feature
provide flexibility, scalability and feature extensibility in order
to reduce the cost of development of business needs. LAN base
feature set offers up to 255-Vlans and comprehensive layer 2
feature with static routing and SVI interface supporting.
Cisco Catalyst 3560-X Series Switch can provide:
1,48 * 10/100/1000 Ethernet ports
2,Four optional uplink network modules with GE or 10GE ports
3,Dual redundant, modular power supplies and fans
4,baseline Layer 3 routing features
5,Flexible NetFlow and switch-to-switch hardware encryption with
the Service Module uplink
6,USB Type-A and Type-B ports for storage and console respectively
and an out-of-band Ethernet management port
The Specifications of WS-C3560X-48PF-L
| Product Type | Switch - 48 ports - Managed |
| Form Factor | Rack mountable - 1U |
| Switch Ports | 48 x 10/100/1000 Ethernet Ports Ethernet Ports |
| Power Over Ethernet (PoE) | Yes |
| Performance | Switching capacity : 160 Gbps |
| Remote Management Protocol | SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3,
SNMP 2c, FTP, TFTP, SSH, CLI |
| Authentication Method | Kerberos, Secure Shell (SSH), RADIUS, TACACS+ |
| Features | Hot swap module replacement, Layer 2 switching, dynamic IP address
assignment , DHCP support, power over Ethernet (PoE),
auto-negotiation, ARP support, trunking, VLAN support, auto-uplink
(auto MDI/MDI-X), IGMP snooping, Syslog support, traffic shaping,
Broadcast Storm Control, High Availability, Multicast Storm
Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP)
support, DHCP snooping, Dynamic Trunking Protocol (DTP) support,
Port Aggregation Protocol (PAgP) support, Access Control List (ACL)
support, Quality of Service (QoS), Jumbo Frames support, MLD
snooping, Dynamic ARP Inspection (DAI), PoE+, Per-VLAN Spanning
Tree Plus (PVST+) |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q,
IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad
(LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3at |
| DRAM Memory | 256 MB |
| Flash Memory | 64 MB Flash |
| Status Indicators | Port status, link activity, port transmission speed, port duplex
mode, power, system |
Figure 1 shows the front panel of WS-C3560X-48PF-L
Dual Redundant Modular Power Supplies
Cisco Catalyst 3750-X Series and 3560-X Series Switches support
dual redundant power supplies;
One power supply is shipped with the switch by default;
Other power supply/suppliers can be purchased when ordering the
switch or next time according to your needs.
If only one power supply is installed, it should always be in the
power supply bay 1.
Table below shows the different power supplies available in these
switches and available PoE power.
Power Supply Models
Feature Set | Models | Total 10/100/1000 Ethernet Ports | Default AC Power Supply | Available PoE Power |
| LAN Base | WS-C3560X-24T-L | 24 | 350W | - |
| WS-C3560X-48T-L | 48 |
| WS-C3560X-24P-L | 24 PoE+ | 715W | 435W |
| WS-C3560X-48P-L | 48 PoE+ |
| WS-C3560X-48PF-L | 48 PoE+ | 1100W | 800W |
| IP Base | WS-C3560X-24T-S | 24 | 350W | - |
| WS-C3560X-48T-S | 48 |
| WS-C3560X-24P-S | 24 PoE+ | 715W | 435W |
| WS-C3560X-48P-S | 48 PoE+ |
| WS-C3560X-48PF-S | 48 PoE+ | 1100W | 800W |
Our Advantage
1.100% Cisco original factory sealed clean serial.
2. Extensive Real Inventory
3. Save up 50%-92% off the Global Price list
4. Flexible payment shipment
5. Unparalleled Experience Service
Shipping
1. Fast: in 2-3 days upon receipt of payment.
2. Safe: original package with protection foam in case of equipment
broken in transportation
3. Economic: Low cost express fee via DHL, Fedex, TNT,EMS,Postal
etc.
4. Flexible: We also ship to your Assigned Forwarder or Pickup by
your forwarder
